Lightweight aluminium tool body with steel chip breaker
Use on vertical or horizontal spindles
HD = SB - 40 mm
Knife holder to adapt edge knives.
Knife holder to adapt grooving knives.
- Application:
For planing and profiling (chamfering) e.g. grooving, bevelling, rounding or profiling in common.
- Machine:
Four-sided moulders.
- Workpiece material:
Softwood and hardwood.
- Technical information:
Resharpenable cutterhead system with constant diameter and constant profile. VariPlan Plus planerhead with knife seatings for ProFix F profile knives (PF 25) and HW microfinish turnblade knives. Profile knives: PTmax 25 mm, SBmax 100 mm. Lightweight aluminium tool body.
Further knife types, dimensions and inch dimensions on request. Servicing with spare parts only by the manufacturer. VariPlan Plus spare knives in section Knives and Spare Parts.
- D: Diameter
- SB: Cutting width
- ND: Thickness of hub
- BO: Bore diameter / interface
- QAL: Cutting material
- nmax: Maximum RPM
- Z: Number of teeth
Spare knives:
| BEZ |
SB
mm
|
ABM
mm
| QAL |
ID
LH
|
ID
RH
|
|---|---|---|---|---|---|
ProFix F knife PF 25 R=3 | 25 | R=3 | HW |
011041
available from stock |
011042
available from stock |
ProFix F knife PF 25 R=5 | 25 | R=5 | HW |
011043
available from stock |
011044
available from stock |
ProFix F knife PF 25 R=10 | 25 | R=10 | HW |
011047
available from stock |
011048
available from stock |
ProFix F knife PF 25 Bevel 45° | 25 | Bevel 45° | HW |
011051
available from stock |
011052
available from stock |
| BEZ |
ABM
mm
|
ID
RH
|
ID
LH
|
|---|---|---|---|
Knife holder for edge knives | D=125, SW=20° |
011300
available from stock |
011301
available from stock |
Knife holder for grooving knives | D=125, SW=20°, NT=6 |
011302
available from stock |
011303
available from stock |
Allen key | SW 4 |
005445
available from stock | |
Allen key | SW 5 |
005452
available from stock |