HeliPlan jointing cutterhead with wear-resistant tool body
Optimum performance with abrasive materials
Leitz HeliPlan jointing cutterhead with wear-resistant tool body
Maximum performance, minimum wear
When jointing abrasive materials, wear occurs not only on the cutting edges, but also on the tool body. Particularly in the gullet area, this can wear out so much that the body must be replaced prematurely for safety reasons. This causes unnecessary costs and reduces efficiency. Using the new HeliPlan jointing cutterhead from Leitz, this problem is a thing of the past. Thanks to special carbide inserts, the gullet area is effectively protected against wear, which significantly extends the lifetime of the tool. At the same time, the tool impresses with the highest processing quality, less noise and energy-efficient use.
0 -fold
Turnblades
0 -fold
Higher performance time by HW cutting material compared to HS knives
0 dB(A)
In comparison to straight through knives
YOUR BENEFITS
- Higher economic efficiency
- Long tool life
- Perfect planing results
- Significantly less noise
AT A GLANCE
- With tungsten carbide inserts to protect the gullet area
- Suitable for large chip removal
- Optionally available with hydro clamping
- 4-fold usable knives
- Diameter 100-280 mm
- Suitable for all conventional planing and profiling machines
- Cutting material HW and TDC
Your benefits due to ...
Sustainability
Long tool life and less noise
Sustainability
Long tool life and less noise
- No wear of the tool body due to carbide inserts in the gullet area
- Long tool life due to the use of HW turnblade knives
- Maximum resource utilisation thanks to reversible carbide knives with four cutting edges
- Less noise and lower power consumption of the machine thanks to adapted cutting arrangement
Efficiency
Large chip removal and maximum user-friendliness
Efficiency
Large chip removal and maximum user-friendliness
- Jointing with large chip removal due to special cutting edge geometry and gullet area design
- Easy handling and quick knife change thanks to standardised knife fixture without wedges
