Leitz HeliPlan strijkfrees met slijtvast gereedschapsbody

Maximum prestaties, minimale slijtage

Bij het verbinden van abrasieve materialen treedt niet alleen slijtage op aan de snijkanten, maar ook aan de body van het gereedschap. Vooral in de spaanruimtes kan deze ook sterk slijten dat de body om veiligheidsredenen voortijdig moet worden vervangen. Dit veroorzaakt onnodige kosten en vermindert de efficiëntie. Met de nieuwe HeliPlan strijkfrees van Leitz behoort dit probleem tot het verleden. Dankzij speciale hardmetalen inzetstukken wordt de spaanruimte effectief beschermd tegen slijtage, wat de levensduur van het gereedschap aanzienlijk verlengt. Tegelijkertijd overtuigt het gereedschap met de hoogste bewerkingskwaliteit, minder geluid en energiezuinig gebruik.

0 -fold
Turnblades
0 -fold
Higher performance time by HW cutting material compared to HS knives
0 dB(A)
In comparison to straight through knives
UW VOORDELEN
  • Hogere economische efficiëntie
  • Lange standtijd
  • Perfecte schaafresultaten
  • Aanzienlijk minder lawaai

 

IN EEN OOGOPSLAG
  • Met hardmetalen inzetstukken om de spaanruimte te beschermen
  • Geschikt voor grote spaanafvoer
  • Optioneel verkrijgbaar met hydrospanning
  • 4-voudig bruikbare messen
  • Diameter 100-280 mm
  • Geschikt voor alle conventionele schaaf- en profileermachines
  • Snijmateriaal HW en TDC

 

Your benefits due to ...

Sustainability

Long tool life and less noise

Sustainability

Long tool life and less noise

  • No wear of the tool body due to carbide inserts in the gullet area
  • Long tool life due to the use of HW turnblade knives
  • Maximum resource utilisation thanks to reversible carbide knives with four cutting edges
  • Less noise and lower power consumption of the machine thanks to adapted cutting arrangement

Quality

Rough machining with fine finish quality

Quality

Rough machining with fine finish quality

  • Despite being designed for rough use, the tool can also be used for finish machining thanks to its rounded cutting edges, additional cutting angles and precise knife seats

Efficiency

Large chip removal and maximum user-friendliness

Efficiency

Large chip removal and maximum user-friendliness

  • Jointing with large chip removal due to special cutting edge geometry and gullet area design
  • Easy handling and quick knife change thanks to standardised knife fixture without wedges

Downloads

pdf
HeliPlan jointing cutterhead with wear-resistant tool body
Type: Productinformatie
Categorie: Schaven en profileren
Klantencontact
Verkoop
+31 (0) 481 748 110
Platinaweg 7-9
6662 PR Elst
Nederland
Deze pagina aanbevelen