Leitz ProfilCut Q Diamond
Edge finishing re-thought
The use of diamond tools is indispensable in edge finishing – but also could be cost-intensive. Resharpening could reduce costs, but each sharpen causes time-consuming machine adjustments due to changes in tool diameter. The result: no real savings, but unnecessary downtimes. Leitz offers the solution with the ProfilCut Q Diamond constant diameter tool system. It can be resharpened up to five times and is then immediately ready for use again – without any adjustment work on the machine. This reduces the costs per tool life, saves time and therefore significantly improves the cost-effectiveness of the entire process. The reusable tool body also ensures maximum sustainability.
0 %
Lower costs per tool life compared to disposable tools
0
Tool lives per knife
0 %
Adjustment effort after resharpening
YOUR BENEFITS
- Low tool life cost thanks to resharpenable exchangeable knives
- No adjustment necessary after resharpening
AT A GLANCE
- Diamond cutting edges
- 5 times resharpenable
- Reusable tool body
- For edge banding machines with high part output
- Various dimensions and profiles available
